bbcnews : An Iranian student leader has died in jail while on a hunger strike to demand his release.
When I remember the movement of the students on "18 tir" (8th July) in tehran,
I remember many things, but I remember no leader or leadership group.
our leader , Mr President khatami drowned in doubts and fears and left the students alone.
after 8th July, Islamic Republic was on urgent need to hang a few students to keep the students in fear and make them remember that they must pay high prices for political activities against Islamic Republic. they chose a few students like Mr. Mohammadi and Ahmad Batebi.
In fact they were not leaders but they were punished as leaders. Alas ..
ps. May his soul rest in peace.
4 Comments:
Good post on a very sad story. peace be upon him/Rest in peace.
damn mullahs. may we get rid of them soon
How tragic and sad. Hopefully a new day will come where freedom of thought and belief may reign instead of senseless hangings.
How to setup a proxy for Iran citizens (for Windows!)If you’re using Windows, it’s pretty straight forward to setup a proxy and help give access to those in Iran who are being censored. If you’re running Redhat/CentOS, please use the linux instructions.
1) Download Squid for Windows
2) Extract that zip archive, and move the “squid” folder to the root of your drive (probably C:\).
3) After moving the squid folder, open “C:\squid\etc\squid.conf” in your favorite text editor (not Word).
4) Configure the DNS name servers on the line that says “dns_nameservers” to point at your ISPs DNS servers.
5) Now the fun part, locking access down the just the Iranian IP blocks.
Inside the text editor search (Control-W) for the line “http_access deny all” and change it to “http_access allow all”. This will make your proxy open and accessible to the world. If you would like to limit your proxy to Iranian IP blocks, you want to change “http_access deny all” to read “http_access allow TRUSTED” add a line (BEFORE the http_access line to setup an access control list [ACL]). This ACL line that defines TRUSTED should read:
acl TRUSTED src 62.60.128.0/17 62.193.0.0/19 62.220.96.0/19 77.36.128.0/17 77.77.64.0/18 77.104.64.0/18 77.237.64.0/19 77.237.160.0/19 77.245.224.0/20 78.38.0.0/15 78.109.192.0/20 78.110.112.0/20 78.111.0.0/20 78.154.32.0/19 78.157.32.0/19 78.158.160.0/19 79.127.0.0/17 79.132.192.0/19 79.170.144.0/21 79.175.128.0/18 80.66.176.0/20 80.69.240.0/20 80.71.112.0/20 80.75.0.0/20 80.191.0.0/16 80.242.0.0/20 80.253.128.0/20 80.253.144.0/20 81.12.0.0/17 81.28.32.0/20 81.28.48.0/20 81.31.160.0/20 81.31.176.0/20 81.90.144.0/20 81.91.128.0/20 81.91.144.0/20 82.99.192.0/18 82.115.0.0/19 83.147.192.0/18 84.47.192.0/18 84.241.0.0/18 85.9.64.0/18 85.15.0.0/18 85.133.128.0/17 85.185.0.0/16 85.198.0.0/18 86.109.32.0/19 87.107.0.0/16 87.247.160.0/19 87.248.128.0/19 89.144.128.0/18 89.165.0.0/17 89.221.80.0/20 89.235.64.0/18 91.98.0.0/15 91.184.64.0/19 91.186.192.0/19 91.206.122.0/23 91.208.165.0/24 91.209.242.0/24 91.212.16.0/24 91.212.19.0/24 91.212.252.0/24 92.42.48.0/21 92.50.0.0/18 92.61.176.0/20 92.62.176.0/20 92.242.192.0/19 93.110.0.0/16 93.190.24.0/21 94.74.128.0/18 94.101.128.0/20 94.101.176.0/20 94.101.240.0/20 94.139.160.0/19 94.182.0.0/15 94.184.0.0/17 94.232.168.0/21 94.241.128.0/18 95.38.0.0/16 95.80.128.0/18 95.81.64.0/18 95.82.0.0/18 95.82.64.0/18 95.130.56.0/21 95.130.240.0/21 188.34.0.0/16 188.93.64.0/21 188.121.96.0/19 188.121.128.0/19 188.136.128.0/17 188.158.0.0/15 193.189.122.0/23 194.225.0.0/16 195.146.32.0/19 212.16.64.0/19 212.33.192.0/19 212.50.224.0/19 212.80.0.0/19 212.95.128.0/19 212.120.192.0/19 213.176.0.0/19 213.176.32.0/19 213.176.64.0/18 213.195.0.0/18 213.207.192.0/18 213.217.32.0/19 213.233.160.0/19 217.11.16.0/20 217.24.144.0/20 217.25.48.0/20 217.64.144.0/20 217.66.192.0/20 217.66.208.0/20 217.146.208.0/20 217.172.96.0/19 217.174.16.0/20 217.218.0.0/15
6) Setup “visible_hostname” (normally just the public IP address).
7) Turn off logging by adding these two lines:
access_log none
cache_store_log none
7) Setup the Squid cache by issuing the following command: “c:\squid\sbin\squid -D –z” (No quotes).
Setup Squid to run as a service by issuing the following command: “c:\squid\sbin\squid –i”
Please don’t run this on a machine that you’re worried about or is used for production sites; and take basic security precautions, ie: moving ftp off the default port, using a firewall package, etc.
Once your server is up and running please DM @austinheap and let me know! I will no longer posting proxies on the public list. If you set one up, please e-mail me@austinheap.com to contribute to the private one or e-mail me if your an Iranian that needs access!
Post a Comment
<< Home